|
|
|---|
Monday, September 6, 2010
Here I explain about how
caring for both maintenance of computer software is also maintenance of the hardware.
1. Defrag your hard disk regularly.
Disk Defragmenter berfingsi to organize and sort your hard drive files
by type so that will ease the process of read / write which causes the workload will be lighter who can ultimately extend the life of the hard disk.
To perform the Disk Defragmenter, follow these steps click the Start menu> Programs> Accessories> System Tools> Disk Defragmenter When running this function there should be no other program in the groove includes a screensaver defrag because it would disrupt this function.
2. Activate screensaver
In addition to the aesthetic nature, screensavers have another piece of important functions. CRT television also use phosphor to display images. If the monitor displays the same image for a while then there is phosphorus that burns continuously. This can lead to problems which the monitor image is dimmed / less clear. Another case, if your monitor is LCD, LED fully equipped with energy saving, the screensaver is not needed anymore.
How to activate the screensaver can be done in many ways, one click Start> Control Panel> Display> Screensaver tab, then select your liking.
3. Adequate ventilation
Place the monitor and CPU in such a way that the ventilation air to and from the monitor / CPU quite smoothly. Botcher ventilation will cause excessive heat so that the components / electronic circuit in it will become hot quickly so that it can shorten the life of components TSB. Therefore, make sure the distance between the monitor / CPU with wall / wall of at least 30 cm. If you need to plug the fan in the room.
4. Use a UPS or stavolt.
Use a UPS for power failure to anticipate the sudden who can cause damage to the hard disk. If he had no UPS, wear Stavolt to anticipate the rise and fall of electric voltage.
5. Shut / close the program who are not useful
Each program is loaded or run who need a memory (RAM) so that more-operated programs who consumed more and more memory. This is in addition can cause a slow computer also gets heavier workload who can ultimately shorten the life of the component / computer.
6. Install an antivirus program and update regularly
To be able to recognize a virus / trojan new antivirus program should be updated regularly. Who already spread the virus on a computer can make you re-install the computer. This is in addition to costs will also cause your hard drive will be damaged faster than if it is not often reinstalled.
7. Clean the Recycle Bin on a regular basis
Actually the files / folders who we delete from the hard disk is lost indirectly because it will be accommodated in the Recycle Bin first was with the intention that someday if you still need to restore again. Recycle Bin-me a lot too who will take up disk space can cause the reading of the hard drive so slow.
Do I look for a garbage-shaped icon with the name of the Recycle Bin> Recycle Bin right-click> click Empty Recyle Bin Or you can run the Disk Cleanup function
The trick Click Start> Programs> Accessories> System Tools> Disk Cleanup> and then select the drive who want to clean> then Tick the Recycle Bin option if you need to check the other who is also (like temporary files, temporary internet files), after click OK.
8. Active Speacker Do not place too close to the monitor
Because the magnetic field that existed at the monitor speakers will affect the color of the monitor becomes uneven or mottled.
9. Uninstall or remove programs who are not useful
Presuming a lot of disk space taken up will slow down the read / write drive so that the workload will be heavier so that the disk will be broken.
10. Clean the motherboard and other peripherals from the dust on a regular basis
At least six months this should be done. Open first and then clean the motherboard and other peripherals (RAM, Video Card, Modem, Sound Card, CDR / CDRW / DVRW, TV Tuner) with a soft brush. At the close when the computer is not used a computer (monitor, CPU, keyboard and (mouse) with a cover so that dust does not easily fit into a computer.
11. Connect the ground cable.
If the casing , take the cable with a length as necessary, the tip of an entity associated with the CPU (the casing) while the other end who is planted in the soil. This will neutralize the electrical current can be who should not flow out (casing) so that it can make a more durable electronic components.
caring for both maintenance of computer software is also maintenance of the hardware.
1. Defrag your hard disk regularly.
Disk Defragmenter berfingsi to organize and sort your hard drive files
by type so that will ease the process of read / write which causes the workload will be lighter who can ultimately extend the life of the hard disk.
To perform the Disk Defragmenter, follow these steps click the Start menu> Programs> Accessories> System Tools> Disk Defragmenter When running this function there should be no other program in the groove includes a screensaver defrag because it would disrupt this function.
2. Activate screensaver
In addition to the aesthetic nature, screensavers have another piece of important functions. CRT television also use phosphor to display images. If the monitor displays the same image for a while then there is phosphorus that burns continuously. This can lead to problems which the monitor image is dimmed / less clear. Another case, if your monitor is LCD, LED fully equipped with energy saving, the screensaver is not needed anymore.
How to activate the screensaver can be done in many ways, one click Start> Control Panel> Display> Screensaver tab, then select your liking.
3. Adequate ventilation
Place the monitor and CPU in such a way that the ventilation air to and from the monitor / CPU quite smoothly. Botcher ventilation will cause excessive heat so that the components / electronic circuit in it will become hot quickly so that it can shorten the life of components TSB. Therefore, make sure the distance between the monitor / CPU with wall / wall of at least 30 cm. If you need to plug the fan in the room.
4. Use a UPS or stavolt.
Use a UPS for power failure to anticipate the sudden who can cause damage to the hard disk. If he had no UPS, wear Stavolt to anticipate the rise and fall of electric voltage.
5. Shut / close the program who are not useful
Each program is loaded or run who need a memory (RAM) so that more-operated programs who consumed more and more memory. This is in addition can cause a slow computer also gets heavier workload who can ultimately shorten the life of the component / computer.
6. Install an antivirus program and update regularly
To be able to recognize a virus / trojan new antivirus program should be updated regularly. Who already spread the virus on a computer can make you re-install the computer. This is in addition to costs will also cause your hard drive will be damaged faster than if it is not often reinstalled.
7. Clean the Recycle Bin on a regular basis
Actually the files / folders who we delete from the hard disk is lost indirectly because it will be accommodated in the Recycle Bin first was with the intention that someday if you still need to restore again. Recycle Bin-me a lot too who will take up disk space can cause the reading of the hard drive so slow.
Do I look for a garbage-shaped icon with the name of the Recycle Bin> Recycle Bin right-click> click Empty Recyle Bin Or you can run the Disk Cleanup function
The trick Click Start> Programs> Accessories> System Tools> Disk Cleanup> and then select the drive who want to clean> then Tick the Recycle Bin option if you need to check the other who is also (like temporary files, temporary internet files), after click OK.
8. Active Speacker Do not place too close to the monitor
Because the magnetic field that existed at the monitor speakers will affect the color of the monitor becomes uneven or mottled.
9. Uninstall or remove programs who are not useful
Presuming a lot of disk space taken up will slow down the read / write drive so that the workload will be heavier so that the disk will be broken.
10. Clean the motherboard and other peripherals from the dust on a regular basis
At least six months this should be done. Open first and then clean the motherboard and other peripherals (RAM, Video Card, Modem, Sound Card, CDR / CDRW / DVRW, TV Tuner) with a soft brush. At the close when the computer is not used a computer (monitor, CPU, keyboard and (mouse) with a cover so that dust does not easily fit into a computer.
11. Connect the ground cable.
If the casing , take the cable with a length as necessary, the tip of an entity associated with the CPU (the casing) while the other end who is planted in the soil. This will neutralize the electrical current can be who should not flow out (casing) so that it can make a more durable electronic components.
Labels: tips
0 Comments:
Subscribe to:
Post Comments (Atom)
